M33 Outstanding character:

1. Inverter to feed 5-25m/min.

2. Individual motor power for each spindle to ensure maximum cutting power.

3. Spindle diameter Φ50 and two pairs of high-precision and high-load support bearings are more suitable for heavy-duty cutting.

4. Horizontal spindle is equipped with out bearing, suit for heavy-duty working of workpiece.

5. All adjustment of spindles are centralized in front of machine, to be convenient to operate.

6. High chromed work table for good durability.

7. The gear case is equipped , to be good for processing the short pieces.

8. A group of side pressure wheel on the right side of left spindle, to adjust pressure flexibly.

 9. Pneumatic pressure loaded to the front shoe of top spindle.

10. Pneumatic pressure loaded to the rear shoe of top spindle.

11. First group of feeding roller and chain-wheel box with pneumatic double- direction adjustment for press and raise , you can make the workpiece feeding or back-feed. 

12. Adopting PLC system to achieve the control of top spindle and feeding beam . Setting the parameter by PLC, easy to view and control.

13. Pneumatic in-feed bottom helical roller is more suitable for large deformation and high moisture of the wood to feed .

14. Multi-group bottom driving roller to improve the feed effect .

15. Adjustable out-feed side pressure plate can meet the different thickness of material output steadily.

16. Pneumatic pressure loading to top feed rollers separately adjustable for easy of feeding with variation in thickness. 

17. Manual oil pump lubricates the work table and carriage, centralized lubrication is easy to control.

18. Adopting electric components from international brand with steady quality.

19. Sealed safety enclosure is for the protection against noise and dust ,and it is helpful for the safe operation.

Arrangement of spindles for series M33：

Note:Any variation to the specification above mentioned will not be further notified since the product specification and designs keeps on changing all the time.”

Professional solution for heavy-duty machining of wooden beams and columns, large wooden squares, and processing of extra-wide type of mouldings processing

φ50mm spindle, out-ball bearings for all horizontal spindles, strong cutting powerful-M33 heavy duty moulder series.