Double End Tenoner series D60M

Professional solution for volume producing two ends profile of panel furniture, door, solid wood floor, solid wood composite floor, PVC floor, MBF floor, wood-plastic composite with max thickness 85mm.

Characteristic

  • 1,Each spindle can rotate , convenient to achieve angle-truncate , tenon, groove and etc
  • 2,Can hoggers on cut-off saw that can discharge waste material more helpfully
  • 3,Adopted widen by high precision linear orbit,  machine can run in precision and wearable. It assure the precission when widen the working size , also can guarantee to fit your highly requirement for setting the working width
  • 4,Orbit lubrication can reduce the frictions of slide when moving , increase the nature life of orbit as well
  • 5, Supported with the roller bearing in the feeding belt , make the movement more stable and reduce the noise
  • 6, Much better to infeed the big size panels with the lengthen chain belt design
  • 7. Adjustable height on in-feed fence is better satisfied with basis positioning requirements for
  • different thickness of wood panel
  • 8, In order to assure every chain board with high precision , we use the high hardeness cast iron and treated with high tempertature and machining by CNC
  • 9. The design of rigid column and carriage to ensure the needs of heavy-duty cutting
  • 10, Text display for width setting .The reset accuracy can reach to ±0.3mm
  • 11,Each spindle is equiped with high precision bearing , spindle speed of milling units reach to 7500r/min.
  • 12, Each spindle is configureed with read out , can display the position of spindle veracious
  • 13, Inverter to feed, feed 5-25m/min
  • 14, Adopted the high class electric component to build up the perfect electric system can increase the stabilization
  • 15, Throught PLC to the control pressure belt and adjustment automaticlly, make the workpieces more stable and veracious
  • 16, Adopted excellent material to make of the precessure belts, keep good wearable
  • 17. Top pressure and bottom conveyor belt has the design of two different speed  , no matter before or behind the fence dot , can be achieved to feed against the benchmark .
  • 18, Sealed safety enclosure is controlled by the pneumatic , can reduce noise levels ,improve extraction and operator safety
  • 19. To equip with out-feed guide roller
  • 20, Dust proof hood on guide of lathe bed to availably keep thread pole clean.

 

Technical Parameter

 

Specification & type

RMD6025M

Working Thickness (mm) 

10 ~ 85

Working Width (mm) 

250 ~ 2500

Cutting circles(max~min)   (mm) 

Left Saw unit

Ø160 ~ Ø200

Right Saw unit 

Left cut~off Saw  

Ø250 ~ Ø300

Right cut~off Saw  

Left and right milling unit 

Ø140 ~ Ø160

Spindle diameters(mm)

Left Saw unit

Ø25.4

Right Saw unit

Left cut~off Saw

Ø35

Right cut~off Saw  

Left and right milling unit

Ø40

Cutterhead length (mm)

 

95

Basic motor powers 

Left Saw unit

3kW/4HP

Right Saw unit

3kW/4HP

Left cut~off Saw

7.5kW/10HP

Right cut~off Saw  

7.5kW/10HP

Left and right milling unit   

2×7.5kW/10HP

Feed

3kW/4HP

Widen

0.75kW/1HP

Total motor power (kW)

39.75kW/53HP

Feed  speed (m/min)

5~ 25

Spindle speed (r/min)

7500

Dust outlet diameter (mm)

Ø120

Overall machine dimensions (L×W×H) (mm)

4735×38100×1660

Weight (tons approx) (T)

6

Note:Any variation to the specification above mentioned will not be further notified since the product specification and design keeps on changing all the time